My driveway is 550′ long, and the water meter is at the road. So far I have determined I should be happy with a 1.5″ ID pipe, for the flow I am considering. I was all set to pull the trigger on HDPE pipe (NSF rated, 200 PSI), until I read some articles that claim this type of pipe becomes brittle with time when exposed to water disinfectants (read chlorine, chloramine, chlorine dioxide etc.), anything the utility puts in the the great lakes water to make it “safe”.
For more information, please visit HDPE pipe for water supply specifications.
So back to the drawing board. The options:
HDPE CTS 200 PSI pipe
Still likely the best option, if I can determine my water company does not use chlorine dioxide (which can apparently shorten the life to 10 so years). Even the “better” disinfectants can bring the life down to 20 so years, which is not ideal. Fittings are expensive, but I can get it in 500′ rolls, which means only one connection. 1.20 a foot for 1.5″ ID
CPVC
By far the most available but the amount of connections and potential health issues from the solvent/glues are scary. In 20 foot sections I would have a lot of joints, all leak potentials. 2.25 a foot for NSF rated 160 psi. Cheap fittings.
Copper
5.50 a foot. The run would cost almost 3000$, in materials. Tried and true. Cheap fittings. Lots of connections, just like CPVC. Unknown performance 4′ underground (potential oxidation/pitting).
What would you select for your home?
Contact us to discuss your requirements of HDPE Gas Pipe. Our experienced sales team can help you identify the options that best suit your needs.
Additional resources:Filter Press vs. Centrifuge: Which One Do I Need to Use?
When it comes to laying in lines for your water utility, there are many options available, but which one will work best? At Team EJP, we're pretty enthusiastic about the promise of HDPE pipe systems. But we realized that some of our clients aren't as familiar with this relatively new material as we are. We kept receiving a lot of questions about what it can or can't do, how do you install it and is it really the best option for your water utility, so we put together this quick reference to help you decide if it's a good match for your needs.
Engineering and Design Properties
One of the most appealing things about HDPE piping is how well it holds up in the environment:
Leakproof:
Because HDPE pipes are thermally fused together, they don't have any place to leak at connections. Studies have shown that 100% of burst HDPE pipes happen in the main body of the pipe, with no breaks at all at the fused connections.
Resistant to chemicals and erosion:
HDPE is a type of plastic, which means it doesn't corrode and is very resistant to extreme conditions in the environment. Problems like the Flint water crisis can't happen when your pipes aren't capable of leaching lead.
Flexible and resistant to fatigue:
We've all seen trenches that, well, weren't as straight as they should be. HDPE is flexible, making it a much more forgiving material in that situation. At the same time, it resists fatigue, so regular movement won't cause a weak point.
Lightweight but strong:
Want ease of installation without having to worry about impact breakage? HDPE is a great pipe material for this situation. Though it's lightweight, it's much tougher and significantly more impact resistant than PVC or similar plastic piping options.
Installation, Maintenance, and Repair of HDPE
Working on HDPE pipe brings you the best of both worlds. It's joined using thermal fusion, making a tight seal, while still remaining light weight and easy to maneuver. Unlike metal pipes which can corrode, leak and leach metals into the water being transported, HDPE holds up well to most soil and water conditions. This means fewer maintenance tasks and trips for your crew and more money left in the budget. It performs well under conditions where ductile iron, PVC and cement pipe won't work. Because of its flexibility, HDPE can be used for horizontal drilling, sliplining, plow and plant, floating or submerged pipe with no serious issues.
HDPE Cost Comparison
HDPE is a cost-effective, permanent solution for your water utility's pipe needs. Its current expected lifespan is conservatively estimated to be between 50-100 years by the Plastic Pipe Institute. Electrofusion fittings are available in sizes up to 12", while 2" or larger pipe is available in 50' straight sections and 3" and smaller pipe is available in coils up to 250-300', making line replacement a breeze, with fewer joins to make.
HDPE pipe is a versatile material that meets many of the demands regularly placed on it by water utilities across the country, and we hope that this guide has helped answer some of your questions. If you do have questions or would like a quote for your upcoming water utility needs, please feel free to contact the experts at Team EJP today for more information.
Are you interested in learning more about HDPE gas pipe specifications? Contact us today to secure an expert consultation!
Comments