Different Types Of Hose Fittings - SWBM fittings Dubai

Hose fittings are couplings that are normally used to secure and attach hoses to pressurized air and water outlets. They are highly versatile and are used for many purposes such as commercial, domestic and industrial purposes. Furthermore, the media that is passed through them can be solid including flour and sugar, it could be liquid including hydraulic oils and chemicals, or it could be gas including compressed air.

Read more

Hose fittings have many different names such as hose connectors, hose adapters, tap connectors, hose couplings, pipe connectors, and joiners. Hose fittings are an essential element of the plumbing system. Even though hoses are quite important, many people still do not know the difference between hoses and pipes and mix them up. However, hoses are quite flexible as well as portable compared to pipes and tubes. Hoses also have integral connectors and fitting ends that are normally attached already and do not need to be attached manually. Moreover, hoses are made up of different materials depending on the transported media as well as application.

Speaking of applications, hose fittings have 2 different types of applications. Hydraulic and pneumatic application. The first one involves the transfer of liquids such as water while the latter involves the transfer of gases.

Nevertheless, here is a list of different types of hose fittings:

If you are looking for more details, kindly visit HT-HYDRAULICS.

Camlock coupling

A Camlock coupling is also known as a Camlock fitting can be used to connect two hoses or pipes so that media can be transferred from one to another. It is used in multiple industries since they are easy to use and require no tools and expertise to connect or disconnect them. Camlock couplings are relatively cheaper compared to other types of hose fittings and save a lot of time. These two aspects of Camlock couplings make them the most popular couplings in the world. Furthermore, they are used in a lot of different industries including but not limited to manufacturing, chemical, gas, oil, agriculture, and pharmaceutical industries. They are extremely versatile as well as durable.

Hose Fittings - Barbed Swivel Push-Lock Adapter, NPTF Pipe, Brass, Series 271

DIXON

Push-lock fittings have sharper barbs than standard barbed fittings for a better grip on rubber hoses without the need of clamps or ferrules. Dryseal threads allow fittings to be sealed without the need of separate sealing compounds. Fittings consist of a two-piece crimped fitting with an O-ring swivel. Fittings swivel until tightened for easy assembly, and may swivel intermittently after installation, but are not meant for live swivel applications as the internal O-ring will wear out.
Applications:
&#;Pneumatic services
&#;Most fluids
&#;Low pressure hydraulics and non-potable water services
Compatible Hose Brands:
&#;Eaton
&#;Gates
&#;Goodyear
&#;Parker Hannifin
Assembly Instructions:
1. Trim hose end with smooth square cut.
2. Lubricate either push-on fitting, hose or both.
3. Insert push-on fitting into hose until first barb is in hose.
4. Place end of fitting against a flat object (bench, wall, etc.) and grip the hose one inch from end. Push with a steady force until end of hose is covered by yellow plastic cap.

Contact us to discuss your requirements of Two Piece Hose Fittings. Our experienced sales team can help you identify the options that best suit your needs.