How are pipes supported?

Pipe supports are a critical component to safe and effective piping system engineering.

Much like other pipe components, implementing supports during design and system implementation can help to significantly reduce costs and ease the installation of any required supports.

This guide will provide a foundational overview of pipe support functions, critical pipe support roles, standards and codes, and standard pipe support designs to help you better understand this complex yet critical topic.

Check now

What is a Pipe Support?

The term pipe supports can often refer to two different types of components: supports and restraints.

However, both product types are essential for safe long-term operation and are effectively both classified under the single umbrella of pipe support systems.

Supports typically help to shoulder and distribute loads across the system in a manner that allows for safe operation and helps to tie the piping system into structural elements for increased safety and support for all parts of the piping process.

In most cases, these objects help minimize and carry the impact of vertical loads.

work alongside supports, helping to limit movement and ensure that pipes remain positioned within a tolerance determined in the system engineering specifications.

Typically, they help to minimize and carry the impact of horizontal loads.

Why Are Pipe Supports Important?

In most cases, these objects help minimize and carry the impact of vertical loads. Restraints work alongside supports, helping to limit movement and ensure that pipes remain positioned within a tolerance determined in the system engineering specifications.Typically, they help to minimize and carry the impact of horizontal loads.

Pipe supports can make the difference between safe operation and complete systems failure&#;especially in emergencies or moments of non-standard operation.

A well-designed pipe support system will ensure everything remains within tolerance if pipe loads surge, structures shift, or temperatures change drastically.

They can also help to support or trigger overflows and other fail-safes to mitigate the affecting condition and return the system to normal operation as quickly as possible and with minimal risk to both piping systems and operational staff.

What Are Common Goals When Choosing Pipe Support Products?

As with most piping products, determining the best pipe support products, sizes, and implementations will require knowing your exact needs, operating environments, budget, and myriad other factors.

However, in most cases, pipe supports are expected to perform one or more of the following tasks:

• Prevent, reduce, or eliminate pipe stresses to maintain allowable thresholds
• Prevent, reduce, or eliminate leakage at joints due to movement, shifting, or load stress
• Absorb or minimize line vibrations during operation
• Counter or minimize the impact of dynamic loadings, including but not limited to seismic shifts, wind stress, and water hammering
• Minimize lift-off or disengagement between piping and additional support structures during operation
• Avoid excessive pipe sag depending on the implementation and standards in question
• Help manage the impact of exposure to temperature extremes (both environmental and within the process) to ensure safe, consistent operation of the piping system
• Help protect integrated equipment, such as sensors, gauges, valves, gates, from failure due to excessive loading
• To manage and direct thermal loads in desirable directions based upon the thresholds and processes in use
• To help support and minimize the load stresses on other support components within the piping support system

Are There Standards to Consider When Determining Pipe Support Needs?

Yes!

The exact standards applicable to your piping system will depend on your industry and location in most cases.

However, the following are some of the principal codes and standards to consider in common locations around the world:

• US Codes and Standards: MSS-SP-58, MSS-SP-69, and MSS-SP-89

• UK Codes and Standards: BS-

• Germany Codes and Standards: VGB-R-510 L

Pipe Support Types Explored

There are numerous ways to consider grouping

What type of insulation you desire, your intended attachment method, your intended attachment location, and the amount of anticipated movement in your system, for example, might all create different groups of products.

You must consider all elements of your system and consult with an experienced engineer to ensure that your supports meet your needs.

Instead of grouping by use type, we will list the different core designs for

Pipe Bearing Supports

There are numerous ways to consider grouping pipe support products depending on the factors you consider important.What type of insulation you desire, your intended attachment method, your intended attachment location, and the amount of anticipated movement in your system, for example, might all create different groups of products.You must consider all elements of your system and consult with an experienced engineer to ensure that your supports meet your needs.Instead of grouping by use type, we will list the different core designs for pipe supports and pipe restraints available and, where applicable, discuss their pros and cons to help you determine the ideal products for your system based on your needs.

These pipe supports are typically primary supports, meaning they usually connect directly to the pipe to support the piping system load. 

Common pipe bearing support design types include:

• Pipe shoes
• Pipe saddles
• Pipe trunnions
• Wear pads

Exact installation requirements will depend on the size and design of the support chosen. 

However, in most cases, these supports are either bolt-fastened or welded.

should remain similar to those of the supported pipes to ensure similar behavior's when welded and comparable performance when exposed to piping process elements or environmental variables.

Dynamically Loaded Supports

Support materials and fasteners should remain similar to those of the supported pipes to ensure similar behavior's when welded and comparable performance when exposed to piping process elements or environmental variables.

These pipe supports can work as either primary or secondary supports, providing variable resistance to movement based on compression and other variables. 

Common design types include:

• Energy absorbers or shock absorbers
• Hanger supports
• Pipe whips or hold down restraints
• Snubbers
• Struts
• Sway braces

Often, these supports are used to minimize the impact of abnormal dynamic conditions, including but not limited to seismic activity,  pump trips, safety/relief valve discharge, or rapid valve closure.

Because the resistance varies, this can allow for one set of standard movements during normal operation while maintaining strict movement tolerances during abnormal conditions.

Constantly Loaded Supports

Often, these supports are used to minimize the impact of abnormal dynamic conditions, including but not limited to seismic activity, pump trips, safety/relief valve discharge, or rapid valve closure.Because the resistance varies, this can allow for one set of standard movements during normal operation while maintaining strict movement tolerances during abnormal conditions.

Constant spring supports typically feature designs and options similar to dynamically loaded supports.

However, the supports are configured to maintain a static resistance level instead of adjusting resistance based on load and other variables.

This makes them ideal for use in extremely high load conditions or systems where movements and loading conditions can create substantial load variability.

Constantly loaded supports (or constants) typically come in horizontal or vertical designs to help match the support to the load type.

However, unlike previous types mentioned, these are limited more or less to the same overall components and design.

Variable Spring Supports

are among the most important devices available to help support pipes.

They are used to balance the concentrated gravitational load of pipe sections while allowing for thermal movement.

Control of the direction and amount of movement of various pipe sections is a major function of piping design.

Variables use coiled springs to support a load and allow movement.

The resistance of the coil to a load changes during compression like

However, unlike those previously discussed designs, variable springs typically work in conjunction with slide plates made from stainless steel, PTFE, or graphite in a secondary support manner instead of attaching directly to the pipes as primary support.

Threaded Members and Pipe Hangers

include more simple and static pieces, often tightened using

Common designs include:

• Stainless steel U-bolts
• Clevis hangers
• 2-bolt pipe clamps
• Riser clamps
• 3-bolt pipe clamps
• Heavy-duty beam attachments

When combined with the appropriate fasteners, these supports provide rigid, durable, and dependable support for pipes of nearly any size.

Summary

• Pipe supports are an essential part of any piping process design.
• Proper component choice, load estimates, and support configuration are essential to optimizing performance and ensuring the safe long-term operation of your piping system.
• Pipe supports help shoulder and distribute loads or stresses in a piping system.
• These systems are especially important for mitigating abnormal conditions, such as load surges, rapid temperature changes, and structural shifting or settling.
• Most regions have codes and standards related to pipe support requirements, so consulting an engineer or professional is critical.
• Pipe supports can be grouped in many ways depending on your needs, including but not limited to attachment type, rigidity, insulation, weldability, function and more.
• Pipe bearing support options include pipe shoes, pipe saddles, pipe trunnions, and wear pads.
• Dynamically loaded supports include energy absorbers or shock absorbers, hanger supports, pipe whips or hold down restraints, snubbers, struts, and sway braces.
• Constantly loaded supports are ideal for use in extremely high load conditions or in systems where movements and loading conditions can create high levels of load variability. Depending on your expected loads, they&#;re available in horizontal or vertical orientations.
• Variable spring supports help support pipe in conjunction with stainless steel, PTFE, or graphite slide plates.
• Threaded members and pipe hangers provide a simplified and highly rigid option for affixing piping directly to structural elements. Options include stainless steel u-bolts, clevis hangers, 2- and 3-bolt pipe clamps, riser clamps, and heavy-duty beam attachments.
  
  

With decades of experience providing 

References:

Mounting element that transfers loads from a pipe to supporting structures

A pipe support or pipe hanger is a designed element that transfer the load from a pipe to the supporting structures. The load includes the weight of the pipe proper, the content that the pipe carries, all the pipe fittings attached to pipe, and the pipe covering such as insulation. The four main functions of a pipe support are to anchor, guide, absorb shock, and support a specified load. Pipe supports used in high or low temperature applications may contain insulation materials. The overall design configuration of a pipe support assembly is dependent on the loading and operating conditions.

Loads on piping system

[

edit

]

Primary load

[

edit

]

These are typically steady or sustained types of loads such as internal fluid pressure, external pressure, gravitational forces acting on the pipe such as weight of pipe and fluid, forces due to relief or blow down, pressure waves generated due to water/steam hammer effects.[1]

Sustained loads:

Occasional loads:

• Wind load: Piping which are located outdoors and thus exposed to wind will be designed to withstand the maximum wind velocity expected during the plant operating life. Wind force is modelled as a uniform load acting upon the projected length of the pipe perpendicular to the direction of the wind. Wind pressure for various elevations will be used to calculate wind force using the following formula. Fw = Pw x S x A, where Fw = The total wind force, Pw = The equivalent wind pressure, S = Wind Drag coefficient shape factor, A = Pipe exposed area.
• Seismic load: Seismic loading Seismic load is one of the basic concepts of earthquake engineering which means application of an earthquake-generated agitation to a structure. It happens at contact surfaces of a structure either with the ground,[2] or with adjacent structures,[3] or with gravity waves from tsunami.
• Water hammer: Water hammer (or more generally, fluid hammer) is a pressure surge or wave caused when a fluid (usually a liquid but sometimes also a gas) in motion is forced to stop or change direction suddenly (momentum change). Water hammer commonly occurs when a valve closes suddenly at an end of a pipeline system, and a pressure wave propagates in the pipe. It's also called Water hammer hydraulic shock.
• Steam hammer: Steam hammer, the pressure surge generated by transient flow of super-heated or saturated steam in a steam-line due to sudden stop valve closures is considered as an occasional load. Though the flow is transient, for the purpose of piping stress analysis, only the unbalanced force along the pipe segment tending to induce piping vibration is calculated and applied on the piping model as static equivalent force.
• Safety valve Discharge: Reaction forces from relief valve discharge is considered as an occasional load. The reaction force due to steady state flow following the opening of safety relief valve in an open discharge installation can be calculated in accordance with ASME B31.1 Appendix II and applied on the piping model as static equivalent force.

Secondary load

[

edit

]

Just as the primary loads have their origin in some force, secondary loads are caused by displacement of some kind. For example, the pipe connected to a storage tank may be under load if the tank nozzle to which it is connected moves down due to tank settlement. Similarly, pipe connected to a vessel is pulled upwards because the vessel nozzle moves up due to vessel expansion. Also, a pipe may vibrate due to vibrations in the rotating equipment it is attached to.

Displacement loads:

• Load due to thermal expansion of pipe
• Load due to thermal movement of equipment

A pipe may experience expansion or contraction once it is subjected to temperatures higher or lower respectively as compared to temperature at which it was assembled. The secondary loads are often cyclic but not always. For example, load due to tank settlement is not cyclic. The load due to vessel nozzle movement during operation is cyclic because the displacement is withdrawn during shut-down and resurfaces again after fresh start-up. A pipe subjected to a cycle of hot and cold fluid similarly undergoes cyclic loads and deformation.

Types of pipe supports

[

edit

]

If you want to learn more, please visit our website zhiang.

Pipe Guides (Cylinder Pipe Guides - Spider Guides)

• Rigid support
• Spring support
• Snubber/Shock absorber

Rigid support

[

edit

]

Rigid supports are used to restrict pipe in certain direction(s) without any flexibility (in that direction). Main function of a rigid support can be Anchor, Rest, Guide or both Rest & Guide.

1) Stanchion/pipe shoe:

Rigid support can be provided either from bottom or top. In case of bottom supports generally a stanchion or Pipe Clamp Base is used. It can be simply kept on steel structure for only rest type supports. To simultaneously restrict in another direction separate plate or Lift up Lug can be used. A pipe anchor is a rigid support that restricts movement in all three orthogonal directions and all three rotational directions, i.e. restricting al the 6 degrees of freedom This usually is a welded stanchion that is welded or bolted to steel or concrete.[2] In case of anchor which is bolted to concrete, a special type of bolt is required called Anchor Bolt, which is used to hold the support with concrete. In this type of support, normal force and friction force can become significant. To alleviate the frictional effect Graphite Pad or PTFE plates are used when required.

Pipe Anchors (Permali Cold Shoes)

2) Rod hanger:

It is a static restraint i.e. it is designed to withstand tensile load only (no compression load should be exerted on it, in such case buckling may take place). It is rigid vertical type support provide from top only. It consists of clamp, eye nut, tie rod, beam attachment. Selection of rod hanger depends on pipe size, load, temperature, insulation, assembly length etc. As it comes with hinge and clamp, no substantial frictional force comes into play.

3) Rigid strut:

It is a dynamic component i.e. designed to withstand both tensile and compression load. strut can be provide in vertical as well as horizontal direction. V-type Strut can be used to restrict two degrees of freedom. It consists of stiff clamp, rigid strut, welding clevis. Selection depends on pipe size, load, temperature, insulation, assembly length. As it comes with hinge and clamp, no substantial frictional force comes into play.

Spring supports (or flexible supports) use helical coil compression springs (to accommodate loads and associated pipe movements due to thermal expansion). They are broadly classified into variable or constant effort support. The critical component in both the type of supports are helical coil compression springs. Spring hanger & supports usually use helical coil compression springs.

1.Variable spring hanger or variable effort support:

Variable spring hanger

Variable effort supports also known as variable hangers or variables are used to support pipe lines subjected to moderate (approximately up to 50mm) vertical thermal movements. VES units (Variable effort supports) are used to support the weight of pipe work or equipment along with weight of fluids ( gases are considered weightless) while allowing certain quantum of movement with respect to the structure supporting it. Spring supports may also be used to support lines subject to relative movements occurring typically due to subsidence or earthquakes. A VES unit is fairly simple in construction with the pipe virtually suspended directly from a helical coil compression spring as the cut away sectional sketch shows below. The main components being:

1. Top plate
2. Pressure plate or piston plate
3. Bottom plate or base plate
4. Helical spring
5. Turnbuckle assembly
6. Locking rods
7. Name plate
8. Can section or cover

Normally clients / engineering consultants will furnish the following data when issuing inquiries for variable effort units.

1. Hot load
2. Thermal movement (with direction i.e. up or + & down or -)
3. Maximum load variation as a percentage (LV % max), if max LV is not specified then it is assumed to be 25% as per MM-SP58.
4. Support types i.e. whether hanging type, foot mounted type etc.
5. Special features such as travel limit stop required if any.
6. Preferred surface protection / paint / finish.

Hot load is the working load of the support in the &#;Hot&#; condition i.e. when the pipe has traveled from the cold condition to the hot or working condition. Normally MSS-SP58 specifies max Load Variation ( popularly called LV) as 25%.[4]

Salient features-

• Allows movement in vertical direction
• Load on pipe varies with movement

Used where

• Displacement < 50mm
• Load variability < 25%
• Rod angulation should be less than 4°

Load variation (LV) or percentage variation =[(hot load ~cold load) x 100]/hot load or load variation (LV) or percentage variation =[(travel x spring rate) x 100]/Hot Load Generally spring supports are provided from top but due to layout feasibility or any other reason Base Mounted type support is fixed to floor or structure & the pipe is made to &#;sit&#; on top of the flange of the spring support.

2.Constant spring hanger or constant effort support:

Bell crank in CSH

When confronted with large vertical movements typically 150 mm or 250 mm, there is no choice but to select a constant effort support (CES). When the Load variation percentage exceeds 25% or the specified max LV% in a variable hanger, it is choice less but to go for a CES. For pipes which are critical to the performance of the system or so called critical piping where no residual stresses are to be transferred to the pipe it is a common practice to use CES. In a constant effort support the load remains constant when the pipe moves from its cold position to the hot position. Thus irrespective of travel the load remains constant over the complete range of movement. Therefore, it is called a constant load hanger. Compared to a variable load hanger where with movement the load varies & the hot load & cold load are two different values governed by the travel & spring constant. A CES unit does not have any spring rate.

Most prevalent work principle for CSH is a bell crank mechanism. The bell crank lever rotates around the fulcrum point. One end of the Bell crank lever is connected to the pipe &#;P&#;, the other end is connected to the spring by the tie rod. Thus when the pipe moves down from cold to hot condition, the point P moves down, and as it moves down the Bell crank lever will rotate in the anti-clockwise direction & tie rod connected to the spring will be pulled in, by which the spring gets further compressed. When the pipe moves up the bell crank lever will rotate (in the clockwise direction) & the tie rod connected to spring will be pushed out thus allowing the spring to expand or relax.

Another popular principle is three spring or adjusting spring mechanism. In this case one main vertical spring takes the main load of the pipe. There are situated other two spring with horizontal orientation to balance any extra load coming in upward or downward direction.

Snubber or shock absorber

[

edit

]

Dynamic Restraints: The restraint system performs an entirely different function to that of the supports. The latter is intended to carry the weight of the pipe work and allow it to move freely under normal operating conditions. The restraint system is intended to protect the pipe work, the plant and the structure from abnormal conditions; it should not impede the function of the supports. Conditions that necessitate the use of restraints are as follows &#; &#; Earthquake. &#; Fluid disturbance. &#; Certain system functions. &#; Environmental influences. In areas that are situated on or near to geological fault lines it is common practice to protect the plant from potential earthquake activity. In such plant there will be a very large requirement for dynamic restraints. Fluid disturbance can be caused by the effect of pumps and compressors or occasionally fluid in a liquid state entering a pipe intended for the transportation of gas or steam. Some system functions such as rapid valve closure, pulsation due to pumping and the operation of safety relief valves will cause irregular and sudden loading patterns within the piping system. The environment can cause disturbance due to high wind load or in the case of offshore oil and gas rigs, impact by ocean waves. The restraint system will be designed to cater for all of these influences. A restraint is a device that prevents either the pipe work or the plant to which the pipe work is connected being damaged due to the occurrence of any one or more of the above phenomenon. It is designed to absorb and transfer sudden increases in load from the pipe into the building structure and to deaden any opposing oscillation between the pipe and the structure. Therefore, dynamic restraints are required to be very stiff, to have high load capacity and to minimize free movement between pipe and structure.

Depending on working principle, snubbers can be classified as

• Hydraulic snubber: Similar to an automobile shock arrestor the hydraulic snubber is built around a cylinder containing hydraulic fluid with a piston that displaces the fluid from one end of the cylinder to the other. Displacement of fluid results from the movement of the pipe causing the piston to displace within the cylinder resulting in high pressure in one end of the cylinder and a relatively low pressure in the other. The velocity of the piston will dictate the actual difference in pressure. The fluid passes through a spring-loaded valve, the spring being used to hold the valve open. If the differential pressure across the valve exceeds the effective pressure exerted by the spring, the valve will close. This causes the snubber to become rigid and further displacement is substantially prevented. The hydraulic snubber is normally used when the axis of restraint is in the direction of expansion and contraction of the pipe. The snubber is therefore required to extend or retract with the normal operation of the pipe work. The snubber has low resistance to movement at very low velocities.
• Mechanical snubber: Whilst having the same application as the hydraulic snubber, retardation of the pipe is due to centrifugal braking within the snubber. A split flywheel is made to rotate at high velocity causing steel balls to be forced radially outwards. The flywheel is forced apart by the steel balls causing braking plates to come together thus retarding the axial displacement of the snubber. Rotation of the flywheel is generated by the linear displacement of the main rod acting on a ball-screw or similar device. It is also very expensive.
• A shock absorber absorbs energy of sudden impulses or dissipate energy from the pipeline. For damper and dashpot, see Shock absorber
• An insulated pipe support (also called pre-insulated pipe support) is a load-bearing member and minimizes energy dissipation. Insulated pipe supports can be designed for vertical, axial and/or lateral loading combinations in both low and high temperature applications. Adequately insulating the pipeline increases the efficiency of the piping system by not allowing the "cold" inside to escape to the environment.

  [

  5

  ]

  For insulated pipe, see Insulated pipe

Insulated Supports (Cold Shoes)

• An engineered spring support upholds a specific load, including the weight of the pipe, commodity, flanges, valves, refractory, and insulation. Spring supports also allow the supported load to travel through a predetermined thermal deflection cycle from its installed condition to its operational condition.

Engineered Spring Supports (Variable Springs)

Materials

[

edit

]

Pipe supports are fabricated from a variety of materials including structural steel, carbon steel, stainless steel, galvanized steel, aluminum, ductile iron and FRP composites. Most pipe supports are coated to protect against moisture and corrosion.[6] Some methods for corrosion protection include: painting, zinc coatings, hot dip galvanizing or a combination of these.[7] In the case of FRP composite pipe supports, the elements required to form a corrosion cell aren't present, so no additional coatings or protections are necessary.[8]

Standards

[

edit

]

• Design: ASME B31.1, ASME B31.3, ASME Section VIII Pressure Vessels
• Manufacturing: MSS-SP58 (Material, Design, Manufacture, Selection, Application & Installation. Note:MSS SP-58- Incorporates and Supersedes the contents of ANSI/MSS SP-69-, MSS SP-77, MSS SP-89, and MSS SP-90), AWS-D1.1, ASTM-A36, ASTM-A53, ASTM-A120, ASTM-A123 and A446, ASTM-A125, ASTM-A153, ASTM-307 and A325, ASTM-C916, ASTM-D, ASTM-D, ASTM-D. Supports with insulation inserts must also reference ASTM-C585.
• Quality Systems: ISO , ASQC Q-92, CAN3 Z299
• Testing: ANSI B18.2.3

Shock Absorber (Hydraulic)

References

[

edit

]

Contact us to discuss your requirements of industrial solution of pipe supports. Our experienced sales team can help you identify the options that best suit your needs.