Mission NOV Centrifugal Pumps, Parts & Distributor

A part of National Oilwell Varco, the Mission line of centrifugal pumps are equipped with innovative features to match the demanding nature of routine, corrosive and abrasive applications. Because of the need for a low pressure mud system, Mission Type W centrifugal pumps were introduced in s to replace duplex pumps. The aim was to apply a high quality centrifugal pump with concentric systems that allowed for abrasive fluids to be mixed and transferred thereby lowering the initial and maintenance costs of drilling. As a result, centrifugal pumps with low pressure mud systems such as Mission Type W became the industry standard.

Goto SUNBO PUMP to know more.

Shown is Mission Type W centrifugal pump

As well depths increased, so was the need for heavier mud weights and centrifugal pumps that could withstand greater horsepower load. This led to the launch of Mission Magnum- a centrifugal pump.

The Magnum has an open impeller design that contains wide-tipped vanes and a more tangential circumference of the suction allowing the pump to create a smoother flow pattern when handling abrasive fluids. The Magnum is available in Magnachrome&#;, hard iron, stainless steel, and aluminum bronze fluid ends. The pumps can be unitized with electric motors, diesel engines, and hydraulic motors (horizontal, vertical, or close-coupled configuration).

Also available, Horizontal and Vertical Close Coupled Magnum

Typical Applications

• Barite, ferric oxide, and mineral oil
• Base drilling muds
• Glass fibers
• Sugar processing
• Ash or coal conveyers
• Cement
• Mine de-watering
• Lime slurries
• Kaolin clay
• Crystalline forms

Features/Benefits

• Versatile stuffing box
• One piece casing
• Casing gasket receded for protection
• Back vanes reduce collection of solids at stuffing box
• Long-life, no-adjustment mechanical seal available for near zero leakage
• Replaceable shaft sleeve
• Lip seals for maximum bearing protection (Labyrinth seals optional)
• Duplex angular contact bearings
• Thicker, stronger concentric casings
• Full pipe diameter entrance for minimum turbulence and maximum efficiency
• Single row roller bearings for increased bearing life
• Easy accessible front access drain
• Reduced high bearing loads

Specifications

• Sizes from 3x2x13 to 10x8x14
• Flow rates from a few gallons per minute up to 2,600 GPM
• Head pressure up to 550 feet
• Best utilized for applications requiring up to 200 HP

Types of Mission centrifugal pumps with proven durability, reliability and strong build include:

• Mission Supreme
• Mission Magnum Vortex
• Mission SpaceSaver
• Mission Supreme Shear
• Mission TurboShear
• Mission Vertical Magnum

Mission Centrifugal Pumps Distributor & Dealer

We sell the complete line of Mission Centrifugal pumps and parts for all of your drilling needs.

Contact us for a free quote today.

Let Our Team Answer Your Questions TODAY!

Our pump engineering experts have the industry knowledge to gladly assist you with any questions, concerns, or inquiries you may have regarding the pumps & pump parts we distribute @ 800.560..

Description

Sandman&#; 6x5x11 Mission Magnum Centrifugal Pump provides improved stability and lower vibration that increases their working life expectancy. All the Spare Parts are also fully interchangeable with other pumps currently on the market.

Tobee® Mission Magnum I Pumps are proven as reliable, heavy-duty, low-cost slurry pumps. The 3×2×13 through 8×6×14 pumps all feature the same power end, which ensures production and reduced spare-part inventory requirements. The Mission MAGNUM I has been engineered for the toughest jobs in drilling, production, well-servicing, and industrial applications. The MAGNUM I is more powerful, more durable, and easier to maintain than any conventional pump in use today.

The Magnum has an open impeller design that contains wide-tipped vanes and a more tangential circumference of the suction allowing the pump to create a smoother flow pattern when handling abrasive fluids. The Magnum is available in Magnachrome&#;, hard iron, stainless steel, and aluminum bronze fluid ends. The pumps can be unitized with electric motors, diesel engines, and hydraulic motors (horizontal, vertical, or close-coupled configuration).
Also available, Horizontal and Vertical Close Coupled Magnum.

Design Features:

The company is the world’s best Mission Pump supplier. We are your one-stop shop for all needs. Our staff are highly-specialized and will help you find the product you need.

&#; Up to 50% more capacity from the 8 x 6 pump
&#; Optimum pressure at low operating speeds
&#; Thicker casing to extend life from wear and corrosion
&#; New impeller design to reduce loads and extend bearing life
&#; Larger, stronger shaft to reduce deflection
&#; Replaceable shaft sleeve in packing wear area
&#; Larger, long-life bearings
&#; Replaceable stuffing box cover
&#; Smoother, non-turbulent flow throughout casing

Typical Configurations:

3x2x13       6x5x14
4x3x13       8x6x11
5x4x14       8x6x14
6x5x11       10x8x14

Typical Applications:

&#; Mud pumping &#; offshore/onshore
&#; Solids control
&#; Dredging
&#; Leveling or Rig Platform (ballast)
&#; Barite, ferric oxide, and mineral oil
&#; Base drilling muds
&#; Glass fibers
&#; Sugar processing
&#; Ash or coal conveyers

Mission Magnum I Pump Parts List :

Mission Magnum I Pump Applications:

Mission centrifugal pumps can be used as Frac discharge pump, Frac suction pump, Oil drilling centrifugal pump, electric centrifugal transfer pump, Skid mounted mixing pump, Transfer pump, Trash pump, Grinding pump, Circulating mud pump, Centrifugal sludge pump, Drilling fluid centrifugal pump, Horizontal directional drilling pump, Denver pump, Filling pump, Feeding pump, etc.

 

Contact us to discuss your requirements of vertical slurry pumps. Our experienced sales team can help you identify the options that best suit your needs.