Natural Gypsum Powder Production Plant - VOSTOSUN

1. The feeder of mill adopts frequency conversion belt conveyor, its running speed is related to the mill electric current, and the automatic feeding function can be realized through PLC integrated control. Compared with the traditional electromagnetic vibration feeder, the feeder has the characteristics of long service life and stable feeding. The permanent magnet iron remover is set on the upper part of the belt conveyor, which can effectively prevent the iron products from entering the mill and causing damage to the mill;

If you are looking for more details, kindly visit our website.

2.The powder collected by the bag filter of the mill is directly transported to the system by a special screw conveyor to reduce the intensity of workers;

3.A gypsum powder buffer bin is set between grinding and calcination, which has two functions. First, it has the function of stabilizing the material. The gypsum powder can be temporarily stored here before entering the fluidized bed furnace. When the front-end discharge is unstable, the stable feeding of the fluidized bed furnace will not be affected. Secondly, it has the storage function. The calcination stability of gypsum powder depends on the stable supply of materials and stable heat supply, and the interruption in the production process should be avoided as far as possible, because there are some quality defects in the gypsum powder before startup and after shutdown. If there is no such silo, the equipment at the front end will be shut down when there is a problem, and the calcination quality of gypsum powder will not be stable when the supply at the front end is unstable;

4.The feeding conveyor in front of the fluidized bed furnace adopts metering conveying equipment. Changing the traditional frequency conversion conveying mode,the functions of accurate feeding and clear production capacity can be realized by using the metering conveying;

5.The hot air fluidized bed furnace is used in the calcination equipment&#;and  we have made some improvements of this basis:

a. Increase the internal space of fluidized bed furnace, prolong the residence time of gypsum powder in the interior, make the calcination more uniform;

b. The installation process of heat exchange tube independently developed by our company can effectively avoid the cracking of fluidized bed furnace shell caused by thermal expansion and cold contraction;

c. The dust chamber on the top of the fluidized bed furnace is increased, and the pre dust collection device is designed at the outlet to reduce the discharge of gypsum powder and increase the production efficiency of the fluidized bed furnace;

d. A waste heat recovery heat exchanger is added between the bottom roots blower and the connecting pipe of the fluidized bed furnace. The normal temperature air is heated by the heat exchanger first, and then added into the fluidized bed furnace, so as to increase the thermal efficiency of the fluidized bed furnace;

e. Special powder conveying equipment is set up. When the inside of fluidized bed furnace and cooler needs to be cleaned, the powder is first transported to the waste bin through the conveying equipment to achieve a clean working environment.

6. The special cooler for gypsum powder is set, and the gypsum powder cooler is set at the back end of the fluidized bed furnace, which can effectively reduce the temperature of gypsum powder before entering the silo, avoid the secondary calcination of gypsum powder in the silo, and effectively ensure the quality of gypsum powder;

7. The finished product storage section has expansibility. Customers can add gypsum powder waste bin in this section. When unqualified powder appears during startup and shutdown, the unqualified powder can be directly transported to the waste bin through PLC centralized control. The gypsum powder in the waste bin can be transported to the system in a small amount in the normal production process of gypsum board;

8. Core equipment We use international famous manufacturers as partners, PLC uses Siemens brand, and the burner uses German Weso brand;

9. Our company has first-class design team, first-class processing team, first-class installation and debugging team, first-class equipment. It is the necessary guarantee for customers to get qualified and stable products.

Product Description

                         FULL AUTOMATIC GYPSUM POWDER MAKING MACHINE

Our factory have been specialized in making full automatic gypsum powder production line for more than 13 years with the up-to-date technology and experienced research and develop team.

 

Feeding and crushing 

Feed the gypsum rock to the raw material storage bin of the auto feeder by using loader.Then it will be transferred to the crusher to be crushed.

 

Milling

Byusing lifter,the gypsum will be transferred to silo and then transferred to Raymond mill by using electromagnetic feeder. Then use

pulsed dust collector to eliminate the dust.

Calcining

Analytical engine will be used to control the fineness of gypsum powder.By using lifter,it 

will be transferred to fluidized calciner. The conductive oil which has been heated by the boiler will be the themal source. High

pressure pressure blast which is from the roots blower will make sure that the gypsum powder insider the kiln is always boiling

and heated evenly.

Loading

After heated,the gypsum powder will be transferred to the bin to be homogenized storage then transferred by tank car or packed and stored.

Process flow chart

 

Quality standard

The quality of building gypsum is in accordance with Chinese National Standard "Gypsum Powder" (GB-), and should meet the following requirements:
 

No.

Item

unit

Indices

1

Initial time

min

&#;6

2

Final time

min

&#;13

3

Bending strength of 2 hours

Additional resources:
What is the purpose of a briquetting machine?

wuxing Product Page

MPa

&#;2.0

4

Content of CaSO4·2H2O

%

&#;5%

5

Content of CaSO4·1/2H2O

%

&#;75%

6

Content of CaSO4III

%

&#;5%

Packaging & Shipping

1. Suitable for long distance transportation 
2. Small or key parts loaded in iron boxes 
3. Iron boxes with welding 
4. Naked 
5. Please mark it in the sales contract for special package
 

Detailed Photos

Main Features

Brief Introduction 
Natural gypsum generally includes dehydrate gypsum and anhydrous gypsum. In order to get the valuable materials, generally, we get semi-hydrated gypsum through heating the dehydrate gypsum. 

Main Technology 
gypsum mine ->first breaking ->second breaking ->grinding ->calcining ->aging ->finished products (CaSO4.1/2H2O) 

Raw Materials 
Content of CaSO4.2H2O in gypsum mine 80%

Company Profile

* The predecessor is stated-owned enterprice,was built in the s.
* A large manufacturer of integrated supply dedicated in researching,manufacturing, trading of building material machinery and construction materials .
* CE approved by the EU 
* ISO certificate 
*We have professional team and rich experience.
* We provide perfect after-sales service to solve customers' worries.
 

 

FAQ

1.Q:Are you a factory or trading company? 
   A:We are a factory.

2.Q:Where is your factory located? 
 A:Our factory is located in Shijiazhuang, Hebei Province, China. All our clients,  from home or abroad, are warmly welcome to visit us! 

3.Q:How can I know more about the product? 
 A: We are honored to send you some pictures and videos about our product. And we welcome every customer visit our factory.

4.Q:How does your factory do regarding quality control? 
 A:Quality is priority. Factory director always attach great importance to quality controlling from the beginning to the end. Our factory has gained CE and ISO authentication.

 

If you have any doubt, pls contact me.

Lucy Dong
 
 

 

 

 

If you are looking for more details, kindly visit Gypsum powder production plant.