What should I do if the cargo of the 2-ton hand chain hoist slips?

A 2-ton chain hoist can lift heavy objects within 2 tons. If it is overloaded, even slightly, it will cause varying degrees of damage to the chain hoist and the heavy objects. If the goods slip, you still have to consider whether this is the reason. Because overloading will increase the load on the braking system, the friction pads will need to generate more friction, which will accelerate the wear of the friction pads, cause brake failure, and cause slippage.

Sliding is divided into different situations, such as slight skidding, some sliding to a stop at one end, and some even the brakes don't work at all. Usually the last situation rarely occurs. Most of the time, the friction plate of the hand chain hoist needs to be replaced. Or the braking system cannot be pressed into a whole. There is a problem with the pawl or pawl spring and the ratchet cannot be stuck. .

In addition, it may be caused by improper operation of the 2t hand chain hoist. For example, the lifting chain has been pulled to the bottom, but the chain is continued to be pulled without realizing it, which can easily lead to brake failure. This is not the case in some ordinary economical models. It is very common, so in order to avoid such problems during production and manufacturing, manufacturers add anti-return washers to the hand chain wheels. The purpose is to prevent such situations from happening and improve the usability of the inverted chain hoist.

Whether a manual hoist is easy to use or not, the quality also determines the number of problems it will have. A good product will have a low failure rate. Of course, the premise is that it is used correctly, which depends on the actual needs.