Hot-dipped Galvanized Guardrail Systems: Beams, Posts and Terminal Sections

Hot dipped galvanized guardrails are durable system that can provide long time protection to the highway vehicles. The complete system is usually composed with beams (w beam or thrie beams), galvanized posts and hot dipped terminal ends. The anti-collision safety grades are: A/B/SA/SB/SS.

Popular size SciSe exports:
Corrugated steel plate beams: Two-wave profile: mm×310mm×85mm×3/4mm; Three-wave profile: mm×506mm×85mm×3/4mm
Matching posts for two-wave: 114/140mm×4.5mm
Upright posts for three-wave: 130mm×6mm, 140mm×4.5mm
Anti-collision grade: A/B/SA/SB/SS

Applied Standards for Manufacture and Quality Control: JT/T281-(Corrugated Sheet Steel Beams For Expressway Guardrail - China), AASHTO M-180(Corrugated Sheet Steel Beams For Highway Guardrail - USA), RAL-RG620 (German) or any other International Standards.

Hot dipped galvanized steel guardrails are considered the effective safety barriers for highway, expressway and bridges. With thick zinc coating surface, the galvanized w beams or thrie beams offer excellent corrosion resistance and rust resistance property. The long service life it offers renders the cost for the high standard galvanizing.

You will get efficient and thoughtful service from DACHU.

Hot Dip Galvanized straight Guardrails with Steel End Rings:

Steel Guardrails straight, 3.8Mx2.6MM, finish: complete-hot Dip Galvanized, Heavy Zinc Plating Anti corrosion protection
Steel end wing: 3.8Mx2.6MM, finish: hot Dip Galvanized Anti corrosion protection

Guardrail, beams, posts, before installation:

Guardrail barrier system installed, in practical project:

Base Steel: Steel Grade Q235B (equivalent to S235JR according to DIN EN and Gr. D according to ASTM A283M) or Q345 (S355JR / ASTM A529M ).

The thickness of the Steel: 3mm, 4mm, 6mm or according to consumers&#; request.

Surface Treatment: Hot dip galvanized or Power coated.

The Thickness of Galvanizing (Double Sides): 550g/m2 (40µ) or g/m2 (80µ) or g/m2 (85µ) or as per your request.

Certificate: ISO, ISO, SGS, CE.

Features: Great corrosion resistant, high intensity, long and durable, with good impact resistance, low cost, long life, higher security, environmental protection, etc.

Other special specification as per client's requirement or drawings.

System Advantages
- The barriers ensure minimum damage to the vehicle and its occupants.
- During collision, the beam absorbs maximum energy by flattening out laterally and restrains the vehicle from veering over.
- Prevents the vehicle from skidding back onto the carriageway by controlling exit angles through gradual deceleration and effective redirection of the vehicle back on to the road.
- Enables quick repairs in case of accidents.
- All components are galvanized for longer life.

For more information, please visit Hot Dip Galvanized W-Beam Guardrail.

Beam Types Photo Illustration:

1.Two-wave Corrugated Steel Beams 2. Three-wave Corrugated Steel Beams

Ordering Information:

Hot Dipped Zinc Plated Steel Beam Highway Guardrail Basic Information Material high grade steel plate Country of Origin China Certificate ISO,CE Supply Ability 400,000MT per year Techniques Surface Treatment Hot-dipped galvanized Zinc Coating 60g/square meter-220g/square meter Product specifications Raw material Q235, Q345 Thickness 4mm or various international standards Thickness Tolerance :+/-0.015mm Wave Width 506mm Width Tolerance +/-0.015mm Wave height 85mm Length mm Theoretical Weight 50 kg/pc PaymentTems PaymentTems 30% T/T as deposit in advance, and 70%T/T before loadingL/C Package & Delivery Minimum Order Quantity 10 tons Package Standard sea worthy packing Delivery 10-20 days after deposit or L/C arrive in our bank. Shipment By bulk vessel

Road Traffic Control Projects:

Galvanized Steel Highway Guardrails in Use

Fittings for the System:
SciSe offers hot dipped galvanized brackets, block spacers, posts and terminals to compose the whole highway barrier system. All surface treatment is hot dipped zinc plating. See photos below.

Gregory Highway W-Beam guardrail is produced in standard AASHTO 12' 6" or 25' 0" lengths. In addition to the standard W-beam sizes, custom lengths and custom post-hole spacing are available on request. Gregory W-Beam steel guardrail is offered in 10-gauge or 12-gauge steel and four types of finishes. We also offer pre-curved shapes as part of our commitment to value.

W-Beam Steel Galvanizing Process

We begin with prime steel that matches the requirements for quality, physical properties, and chemistry. A multi-stage cleaning process prepares the metal for galvanizing on our continuous galvanizing line. Production then pierces the steel with holes and/or slots (to either industry standards or W-beam guardrail specifications) and roll-forms it into the W-Beam profile in one continuous process.

Gregory&#;s continuously galvanized process assures a consistent finish on the W-beam steel guardrails. It also eliminates sharp points and uneven zinc build-up that is typically found in hot-dip galvanized products. While most highway guardrail manufactured by Gregory is supplied in galvanized finish, it is also available in black, painted epoxy coatings, or weathered steel as alternative finishes for aesthetic applications.

W-Beam Guardrail Meets AASHTO Specifications

Gregory W-Beam guardrail is manufactured to AASHTO specifications in M-180 Class A or B, and finish types 1, 2, 3, or 4. Every piece of steel guardrail is stamped with a brand registration that is repeated throughout the entire length of the rail.

Are you interested in learning more about Galvanized Highway W Beam Guardrail? Contact us today to secure an expert consultation!