Where does Teflon sheet go on heat press?

If you are looking for more details, kindly visit DELONG.

You will get efficient and thoughtful service from DELONG.

When using a heat press, the Teflon sheet is an important accessory that helps to protect your garments and heating element. It goes between the fabric and the heating platen to prevent any heat or residue from transferring onto your material.

Here is a step-by-step guide on where the Teflon sheet goes on a heat press:

1. Start by turning on your heat press and allowing it to reach the desired temperature for the type of material you will be pressing.

2. Place your garment on the lower platen of the heat press, making sure it is smooth and free of any wrinkles or creases.

3. Lay the Teflon sheet over the top of your garment, ensuring that it covers the entire area that will be pressed.

4. If you are pressing a transfer or design onto the garment, place it on top of the Teflon sheet in the desired position.

5. Lower the top platen of the heat press onto the garment, Teflon sheet, and transfer (if applicable) with gentle pressure.

6. Follow the recommended time and temperature guidelines for the specific material you are working with.

7. Once the pressing time is complete, lift the top platen of the heat press and carefully remove the Teflon sheet and transfer paper (if used).

8. Allow the garment to cool before handling or peeling off any transfer paper.

By following these steps and using a Teflon sheet correctly, you can protect your garments from heat damage and ensure a successful heat transfer application. Remember to always refer to the manufacturer's instructions for your heat press and materials for the best results.

For more 6mm ptfe sheet, 5mm ptfe sheetinformation, please contact us. We will provide professional answers.